Basket Empty
Home
About
Policies
FAQs
Shipping & Returns
Contact
Products
Custom Fuel Injectors
Acura
Audi
BMW
Chevrolet-
Dodge
Ford-
Honda
Hyundai
Infiniti
Mazda-
Mercedes Benz
Mitsubishi-
Nissan-
Nissan 240SX 200SX CA18DET
Nissan Skyline GT-R R32 R33 RB26DETT Low Impedance Top Feed
NissanJDM Skyline R33 RB25DET Side feed
NissanSkyline GT-R R32 R33 RB20DET High Impedance Top Feed
Nissan 240SX- 200SX SR20DET Side feed
Nissan1993-96 300ZX
Nissan 2003-10 350Z & 370Z
Nissan 1990-93 300ZX with Clips
Pontiac
Porsche
Subaru-
Toyota
Volvo
VW
OEM Fuel Injectors
Performance Fuel Pump
Fuel Injection Cleaning
Motorcycle Fuel Injectors
Marine Fuel Injectors
Home
>
Custom Fuel Injectors
>
Nissan-
>
Nissan 1990-93 300ZX with Clips
Nissan 1990-93 300ZX TT Set of 6# 550cc ORO5 Fuel Injectors with Clips
Code:
CustInj-Niss-300-90-93-550
Quantity in Basket:
None
Quantity:
Price: $329.990
This is for 6# 550cc Injectors
These are High Impedance
You will recieve 6# 550cc Injectors Use for modified 1990-93 Nissan 300ZX TURBO VG30DETT These come with the flow sheet and with the New Pigtails These injectors are 550cc direct fit injectors for 1990-1993 Nissan 300ZX turbos. You will receive 6 of them. The electronic fuel injector is the termination point for the entire fuel delivery system. There is very small allowable variance in the quantity and spray pattern of the fuel delivered. As the demands placed upon this component increases with increasing degrees of performance the allowable variances must decrease. At TLF Performance our fuel injectors are built to insure maximum expectations are achieved at each and every performance level. Balanced and matched to increase flow rate and atomization, tolerance held within +/- 1.5%. Fuel Injectors are leak tested at three times OEM operating. Sizes available from 270cc - 900cc. Injectors come complete with grommets and o-rings. We carry injectors for all makes in all sizes. These come with 1 year warranty. All have been re-manufactured from original equipment Nissan/Japanese Electronics Corp (JECS) fuel injectors to the higher flow rating and placed in flow-matched sets. All new o-rings/seals are supplied for installation
High Impedance Fuel Injectors
Specifications:
Condition: Re-Manufactured
Comes with Flow Sheet
Flow Rate in CC per minute: 550CC/min @ 43.5 PSI or 3 BAR
Resistance: 11.1 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
O-rings Included: YES
Warranty: 1 Year Warranty!
CH-161 550cc